                  FS2004 De HAVILLAND HERON 1, 2B, AND 2D
                         RADIO & NAVIGATION UPDATE
                         =========================

This is an update for my "Three Herons" series, resolving all issues 
reported with the radio and navigation systems. It supersedes all 
previous updates, but does not require any of the previous updates to 
be installed first.

To enable the features of this update you must apply all of the actions 
listed below, so please read this file in its entirety.

Issues addressed:
COM1 Radio	- would not tune manually
		- the updated "fix" would not tune in correct increments
NAV1 Radio	- would not tune manually
NAV2 Radio	- would not tune manually
NAV1/2 insts	- users with smaller screens could not read detail


INSTALLATION

These updates should be applied to all three models individually if you 
have them installed.

1.	Open the aircraft.cfg file of each model in a text editor (like 
        Notepad - don't use a word-processor as it will save the file 
        in a bad format). Find the section headed [radios].

        Delete that entire section and replace it with:

        [Radios]
        Audio.1=1
        Com.1=1, 0 
        Nav.1=1, 0, 1
        Nav.2=1, 0, 0
        Adf.1=1
        Transponder.1=1
        Marker.1=1

        Save the file(s).

2. 	Extract the files panel.cfg and navigation.bmp from this zip file
        into each aircraft's panel folder. Some are different between the 
        aircraft, so take care to extract the correct files. Overwrite 
        the existing panel.cfg files when asked.

3.	If you installed any of the previous updates, please seek out the 
        file jh.fsd.genradio.com.gau in your gauges folder and delete it. 
        This was a modified version of another person's work and I was 
        never able to contact them for formal permission. It is no longer 
        used, and is of no use as it doesn't tune the radios in the 
        correct increments.


OPERATION

Your radio and navigation instruments will now work correctly. However, 
please note that in order to manually tune the COM1 radio, you must turn 
the unit on by clicking with the mouse on the switch at bottom left.

Users having difficulty reading the detail on the NAV1, NAV2 and ADF 
dials can see these in larger form by using additional pop-up windows.

Click on the white rubber bung for NAV1 and NAV2. (That bung is actually 
the stop for the inward-opening cockpit window). Repeat to hide the 
enlarged instruments. Shift-6 on the keyboard will perform the same 
function.

Click below the ADF instrument to enlarge it. Repeat to shrink it again.
Shift-7 on the keyboard will perform the same function.


ACKNOWLEDGEMENTS

I am very grateful to Niger Broder for his considerable help in resolving 
the issues.


PROBLEMS?
Should you have any problems with these aircraft (and I hope you don't), 
please address all issues via my web site at 
http://www.adventure-unlimited.org.

Happy flying!

John Hinson
London, UK
May 2006
     |
===X=O=X===
   '   '
