FS2004 STEREO SOUND UPGRADE - BRISTOL HERCULES ENGINES
======================================================

This stereo sound upgrade of Harry Follas's Bristol Hercules piston-engine sounds for FS98 was created primarily for use with the Handley Page Hermes by Georg Hauzenberger, but should work well with any aircraft that was fitted with these engines. This includes aircraft such as the Handley Page Hastings, Grumman Albatross, Nord Noratlas, Vickers Viking, Short Solent, Avro Lancaster (Mk2 models) and the Bristol Beaufighter. But NOT the Lockheed Hercules!

I've never heard a Hermes running, nor am I ever likely to! However, listening to both a Noratlas and an Albatross on the ground and in the air confirmed that the sounds Harry created for FS98 are really too weak and "throbby" in FS2004.

By converting the sounds to FS2004 multiple-engine stereo, the engines now emit a realistic piston-engine roar at full throttle, but this quietens down to a more subtle sound in cruise. Other associated sounds have been added - ehgine startup, shutdown and wind effects in flight. Touchdown effects will now detect if the aircraft is landing on ground or water so you can comfortably use these sounds with amphibious aircraft.

INSTALLATION
Please take a backup of your aircraft's sound folder before installing the new files.

You need the original Bristol Hercules sound set by Harry Follas, which is provided with a number of aircraft models, including the Hermes and Hastings. It can also be downloaded from Flightsim.com as an individual sound pack for FS98. Ensure that all of the original sound files are in the sound folder concerned before proceeding with the upgrade.

Ready? Unzip all the *.wav and *.cfg files into the sound folder, overwriting the existing sound.cfg file as you go - you should not have to over-write anything else. 

That's really all you have to do.

However . . . to get the best effect from the engine startup sounds, you may need to extend the time taken for the engines to fire up in the aircraft's aircraft.cfg file.

To do this, open the aircraft.cfg in a text editor. In the section marked [piston_engine] look for the line marked "normalized_starter_torque".

Keeping a note of the existing setting (in case you want to change back later), alter the figure to read:
normalized_starter_torque=0.168

FUTURE WORK
I only regard this as Version 1. There are some areas I would like to improve as I gain knowledge of this intriguing science, which is all new to me. However, I hope you find it is good enough to make your aircraft sound much, much better.

CREDITS
Harry Follas did a marvellous job creating the original sound files, and I have not had to modify any of his original sounds to create these new effects. I have not been able to contact Harry and suspect he is no longer involved in the Flight Simming world (he must have grown up quicker than me!). But I hope he will be happy that his work created all that time ago is still in use.

The other sounds have all been converted, adjusted, processed and whatever from Microsoft's original sound effects.

I would never have started on this project if Georg Hauzenberger hadn't produced those two lovely Handley Page models - thanks Georg!


John Hinson, London UK, 25/8/04
Email: aviator@sftt.co.uk
     |
===X=O=X===
   '   '