                       SOUTH AUSTRALIA SCENERY
                 AIRPORTS & FACILITIES DATA for FS2004
                              VERSION 2
                 =====================================

These AFCAD2 files are for use with the free add-on scenery from Roger 
Leupold (fs9sav1.zip) are not suitable for the default FS2004 airfields. 
They will allow the scenery (designed for FS2002) to become more useable 
in FS2004.

They will allow you to plan routes, and take off and land at some 76 
airfields featuring in the scenery, with ATC routing you appropriately.

AI aircraft can now land, taxi, park and take off in the correct locations, 
and you can introduce your own AI traffic, too, if you wish. Every airfield 
has at least one parking space (even the tiniest airstips) but airfields 
featuring hangers and other scenery have more. The parking positions at 
those small airstrips have been chosen from my imagination - I doubt if 
many have "official" parking points anyway - generally the aircraft will 
just pull off the runway to a convenient spot.

Version 2 updates the airports to use the correct ICAO codes which were 
unavailable to me at the time of the original release of these files. This 
data has been made available by Mal Lloyd in the file 
australian_icao_codes.zip . This has not been as simple exercise as might 
be expected, with variations in spelling of names and differences in airport 
co-ordinates, so it is possible that the odd one is identified incorrectly. 
There are also a substantial number of airstrips not in his listing, 
presumablyt because they are too minor to warrant ICAO identification, and 
these have been allocated codes in accordance with Microsoft's practice of using three letters and a digit 
- e.g. YBS2.

There seem to be one or two elevation problems with the airfields (this may 
vary depending whether you are using add-on scenery mesh) with some 
airstrips perched on top of a mountain. The most spectacular of these is 
Wudinna (YWUD) where the airfield appears on two levels with one runway 
passing through the mountain and runway 18 doing an excellent emulation of 
Indiana Jones' Ark of the Covenant! A fix for this one is detailed below 
with the installation instructions. I'd be happy to fix other problems if 
anybody can tell me the correct altitudes.

I don't claim to be a high-tech expert on AFCAD or the airports themselves, 
and therefore would not clain these files are perfect. Hopefully they will 
do the job, though, but if you encounter any problems do let me know.

However, please be aware that I did not create the scenery or the ICAO 
listing. I do not consider it my place to "correct" shortcomings of either - 
all I am doing is providing a set of AFCAD files to go with them.


INSTALLATION

You will make backups before changes, won't you!

A. IF YOU HAVE NOT INSTALLED THE PREVIOUS VERSION:

1. Place the AF2_xxxx.bgl files into the same folder that the add-on 
scenery has been installed to. This varies from the usually recpmmended 
procedure of placing such files in the ......FS9\Addon Scenery\scenery 
folder. The advantage of doing this the way suggested here is that if you 
choose to turn off the add-on scenery, the A&F Data will be turned off too, 
reverting to the Microsoft default data. In the case of the South Australia 
scenery, this will be something like: ...FS9\Addon Scenery\South Australia 
Airports\scenery .

2. To fix the problem at Wudilla you also need to make a small change to the 
scenery.cfg file (in the main FS9 folder). Seek out the entry for the South 
Australia scenery, which will look something like this (details may differ):

[Area.107]
Title=South Australia Airports
Local=Addon Scenery\South Australia Airports
Remote=
Active=TRUE
Required=FALSE
Layer=114

Immediately beneath this, add two lines as follows:

Flatten.0=308,S33 01.00,E135 25.00,S33 01.00,E135 27.00,S33 03.00,E135 27.00,S33 03.00,E135 26.00
Exclude=S33 02.0147,E135 26.4649,S33 02.9141,E135 26.38,objects

(You may be viewing this "wrapped" onto several lines, but you must enter it 
as one line only).

3. Start up (or restart) the Flight Simulator and the changes will be 
activated.

4. If you plan to add AI traffic, you will need to add the following entries 
to your airports.txt (or whatever you have chosen to call it) file before 
compiling the traffic:

YADG,S35* 17.0300',E138* 30.0300',360.6	// Aldinga
YARK,S30* 24.0000',E139* 20.0000',779.9	// Arkaroola
YALA,S27* 20.0000',E133* 38.0000',3530.1// Marla
YAMK,S30* 27.3200',E137* 09.9500',249.0	// Andamooka
YARS,S34* 25.9700',E137* 54.0200',306.9	// Ardrossan
YBVA,S34* 05.0000',E138* 21.0000',146.9	// Balaklava
YBLM,S31* 07.0000',E138* 43.0000',1999.9// Blinsman
YBMR,S34* 13.9900',E140* 28.3500',64.9	// Barmara
YBLG,S28* 58.9800',E140* 50.9800',255.8	// Bollards Lagoon
YBS2,S31* 58.7000',E140* 33.0200',649.9	// Boolcoomata Station
YBOR,S36* 16.0000',E140* 43.0000',259.9	// Bordertown
YBI2,S34* 42.0000',E135* 55.0000',39.9	// Boston Island
YBOV,S31* 38.4200',E129* 00.2200',1112.1// Border Village
YCLE,S37* 14.3500',E140* 26.4000',149.9	// Callandale Station
YCBP,S29* 02.4000',E134* 43.2500',739.9	// Cooper Pedy
YCDH,S27* 54.0000',E134* 03.0000',899.9	// Cadney Park
YCDU,S32* 07.8333',E133* 42.5833',77.0	// Ceduna
YCOF,S34* 35.0000',E135* 31.0100',17.9	// Coffin Bay
YCU2,S31* 39.0000',E139* 33.0000',852.7	// Curnamona Staton
YDPW,S32* 47.0000',E134* 35.0000',209.9	// Deep Well Station
YELN,S33* 39.0000',E134* 54.0000',60.9	// Elliston
YERN,S26* 15.3700',E132* 10.2900',2318.9// Ernabella
YERU,S31* 26.0700',E139* 25.4800',229.9	// Erudina Station
YFRG,S26* 46.3300',E132* 01.0300',1731.9// Fregon
YGAW,S34* 36.0700',E138* 42.3400',159.9	// Gawler
YGD2,S26* 57.0000',E133* 37.0000',1105.9// Granite Downs
YGWA,S35* 28.9167',E138* 45.0833',104.0	// Gawler
YHA2,S33* 27.0000',E138* 51.0000',1799.9// Hallett
YHO2,S32* 57.5000',E136* 21.0000',899.9	// Holders
YIDK,S26* 58.0000',E133* 19.3100',1315.9// Indulkana
YIN2,S32* 48.0000',E134* 41.0000',299.9	// Inkster Station
YJST,S33* 11.9300',E138* 37.0000',1538.0// Jamestown
YKD1,S33* 59.0000',E137* 41.0100',134.9	// Kadina
YKG2,S34* 59.0000',E140* 51.0000',429.9	// Kringin
YKEN,S26* 20.0000',E132* 26.0000',2000.0// Kenmore Park Station
YKIG,S36* 48.9900',E139* 52.9500',7.9	// Kingston SE
YKTH,S36* 07.0000',E140* 15.0000',87.9	// Keith
YLAO,S35* 22.0100',E140* 27.9900',259.9	// Lamaroo
YLYK,S34* 36.9200',E138* 54.9100',784.9	// Lyndoch
YLYH,S30* 15.0000',E138* 22.0000',424.9	// Lyndhurst
YLOK,S33* 33.0000',E135* 42.0000',349.9	// Lock
YLOX,S34* 28.5500',E140* 39.8333',125.0	// Loxton
YAMT,S26* 11.3200',E131* 07.1300',2278.9// Amata
YMCT,S37* 35.0167',E140* 21.9667',56.0	// Millicent
YMBD,S35* 04.1400',E139* 14.0500',179.9	// Murray Bridge
YMEG,S35* 42.1300',E139* 20.8600',4.9	// Meningie
YMR2,S29* 39.3000',E138* 04.0000',163.9	// Maree
YMTX,S26* 03.0000',E135* 15.0000',512.9	// Mount Dare Station
YML2,S30* 10.0000',E138* 42.9800',649.9 // Mount Lyndhurst Station
YMYT,S28* 35.0000',E140* 19.0000',90.9	// Merty Station
YMWT,S29* 54.9900',E139* 45.0000',984.2	// Moolawanta Station
YNO2,S35* 10.5900',E138* 29.3700',19.0	// Noarlunga
YNP2,S26* 11.0000',E130* 13.0000',3198	// Nyapari
YPED,S34* 42.1500',E138* 37.2500',67.0	// Edinburgh Military
YPNG,S31* 55.0000',E132* 59.9999',75.0	// Penong
YPSH,S35* 45.0000',E137* 58.0000',498.0	// Penneshaw
YRBE,S37* 10.6600',E139* 46.0000',62.0	// Robe
YSYN,S35* 18.7500',E138* 59.0300',49.0	// Strathalbyn
YTYS,S26* 13.0000',E133* 55.0000',1187	// Tieyon Station
YWD2,S33* 49.0100',E138* 21.0000',318.0	// Wirreanda
YWKI,S34* 11.0500',E140* 01.8333',138.0	// Waikerie
YWMC,S28* 54.0000',E136* 20.0000',298.0	// William Creek
YWLN,S30* 25.0000',E139* 26.0000',168.0	// Wooltana Station
YWEO,S30* 39.0000',E139* 21.0000',357.0	// Wertaloona Station
YYOR,S35* 01.0000',E137* 37.0000',124.0	// Yorktown


The remaining airports in the scenery already exist in the FS2004 default 
configuration.

B. IF YOU ARE UPGRADING FROM THE OLD VERSION:

1. Delete all of the the AF2_xxxx.bgl files from the folder that the add-on 
sceneray has been installed to. In the case of the South Australia scenery, 
this will be something like: 
...FS9\Addon Scenery\South Australia Airports\scenery .

2. Place the new AF2_xxxx.bgl files from this zip file into the same folder 
that the add-on sceneray has been installed to. This varies from the usually 
recpmmended procedure of placing such files in the 
......FS9\Addon Scenery\scenery folder. The advantage of doing this the way 
suggested here is that if you choose to turn off the add-on scenery, the A&F 
Data will be turned off too, reverting to the Microsoft default data.

3. If you have installed AI traffic to operate in and out of these airports, 
you will need to change the old ICAO codes to the new ones. To make this 
easier for you, the enclosed file changes.txt contains a list of "before" 
and "after" codes.


C: TO UNINSTALL:

1. Delete the files and the default will then be active.
2. Remove that line from the scenery.cfg file.

ANY PROBLEMS?
Please refer to my web site at www.adventure-unlimited.org for all support 
issues and contact.

THANKS
Thanks to Roger for his work on developing this scenery for our enjoyment, and 
to Mal for providing his excellent listing.

COPYRIGHT
These files are free to you. You must not make money out of them!

Happy flying!

John Hinson                            |
Harrow, UK                        ===X=O=X===          
September 2006                       '   '
www.adventure-unlimited.org                       SOUTH AUSTRALIA SCENERY
                 