                      AIRPORTS OF VICTORIA SCENERY
                 AIRPORTS & FACILITIES DATA for FS2004
                              VERSION 2
                 =====================================

These AFCAD2 files are for use with the free add-on scenery from Sebastian 
Szalai of Victorian Airfields v1.1 (sabs_vic_airfields2003v11.zip at AVSIM) 
and are not suitable for use with the Flight Simulator default scenery. 
(There is a file on Flightsim.com named sabsvic1.zip but this is probably 
v1) These additional files will allow the scenery (designed for FS2002) 
to become more useable in FS2004. 

They will allow you to plan routes, and take off and land at all of these 
airfields and airstrips, and ATC will route you appropriately. 

AI aircraft can now land, taxi, park and take off in the correct locations, 
and you can introduce your own AI traffic, too, if you wish. Every airfield 
has at least one parking space (even the tiniest airstips) but airfields 
featuring hangers and other scenery have more. The parking positions at 
those small airstrips have been chosen from my imagination - I doubt if 
many have "official" parking points anyway - generally the aircraft will 
just pull off the runway to a convenient spot.

Version 2 updates the airports to use the correct ICAO codes which were 
unavailable to me at the time of the original release of these files. This 
data has been made available by Mal Lloyd in the file 
australian_icao_codes.zip . This has not been as simple exercise as might 
be expected, with variations in spelling of names and differences in airport 
co-ordinates, so it is possible that the odd one is identified incorrectly. 
There are also a substantial number of airstrips not in his listing, 
presumably because they are too minor to warrant ICAO identification, and 
these have been allocated codes in accordance with Microsoft's practice of 
using three letters and a digit - e.g. YYP3.

I don't claim to be a high-tech expert on AFCAD or the airports themselves, 
and therefore would not clain these files are perfect. Hopefully they will 
do the job, though, but if you encounter any problems do let me know.

However, please be aware that I did not create the scenery or the ICAO 
listing. I do not consider it my place to "correct" shortcomings of either - 
all I am doing is providing a set of AFCAD files to go with them.


INSTALLATION

You will make backups before changes, won't you!

A. IF YOU HAVE NOT INSTALLED THE PREVIOUS VERSION:

1. Install the FS2002 Victorian Airfields v1.1 scenery into FS2004 as 
described by the author.

2. Place all of the AF2_xxxx.bgl files into the "scenery" folder of the 
same folder that the airports scenery has been installed to. This varies 
from the usual recommended procedure of placing such files in the 
...FS9\Addon Scenery\scenery folder. The advantage of doing this the way 
suggested here is that if you choose to turn off the add-on scenery, the 
A&F Data will be turned off too, reverting to the Microsoft default data. 

3. Start up (or restart) the Flight Simulator and the changes will be 
activated.

4. If you plan to add AI traffic, you will need to add the following entries 
to your airports.txt (or whatever you have chosen to call it) file before 
compiling the traffic:

YAB3,S37* 40.5000',E146* 19.2900',1604	// Aberfeldy
YAF3,S37* 41.9100',E145* 27.8400',377.0	// Yarra Valley - Adams Farm
YAPO,S38* 46.5600',E143* 39.7500',3.0	// Apollo Bay
YAVE,S38* 01.6100',E144* 29.4700',32.0	// Avalon East
YAV3,S37* 08.3200',E143* 34.1900',944.0	// Avoca
YBA3,S38* 08.6200',E144* 08.6900',288.0	// Barraboot Hills
YBMM,S36* 16.0000',E144* 39.1600',367.0	// Bamawn
YBEN,S36* 58.2100',E147* 41.6400',2312	// Benambra No1
YBS3,S35* 56.1500',E141* 03.0700',524.0	// Buckhurst Station
YBLE,S38* 03.7600',E145* 48.1200',187.0	// Labertouche
YLB3,S37* 42.0000',E142* 50.7700',685.0	// Lake Bolac
YBEU,S35* 56.3800',E142* 18.1300',334.0	// Beulah
YMB3,S36* 43.8500',E147* 09.9000',1099	// Mount Beauty
YBN3,S37* 31.8800',E144* 49.6500',774.0	// Bynong Airstrip
YBR3,S36* 57.6300',E147* 42.3600',2260	// Benambra No2
YBXH,S37* 52.2100',E141* 43.1600',291.0	// Branxholme
YBUP,S38* 00.9800',E145* 46.3100',196.0	// Bunyip North
YBD3,S37* 02.5100',E145* 48.2400',1030	// Bonnie Doon
YUNG,S36* 16.5300',E143* 47.4700',360.0	// Borung
YBGR,S36* 38.3000',E143* 56.9500',462.0	// Raywood, Bridgewater
YBRS,S38* 15.5300',E144* 25.6400',16.0	// Barwon Heads
YBBT,S36* 03.7200',E143* 47.2200',314.0	// Boort
YBSS,S37* 43.6600',E144* 25.2700',520.0	// Bacchus Marsh
YCBR,S29* 31.3167',E148* 34.9333',500.0	// Collarenebri
YCDE,S38* 19.0300',E143* 03.0000',459.0	// Cobden
YCEM,S37* 43.2400',E145* 24.5400',262.0	// Melbourne Coldstream
YCOH,S35* 47.6200',E144* 10.2700',262.0	// Cohuna
YCOL,S34* 14.8600',E141* 36.0500',108.0	// Culleraine
YCNR,S37* 31.4500',E149* 10.1200',364.0	// Cann River
YCS3,S38* 29.3300',E144* 56.9400',29.0	// Cape Schank
YCES,S38* 08.3800',E144* 15.6200',147.0	// Geelong Ceres
YCTN,S37* 37.0000',E141* 21.1100',209.0	// Casterton
YDB3,S36* 55.7300',E142* 29.8000',557.0	// Dadswell Bridge
YDLE,S37* 08.5700',E146* 11.3300',1197	// Delatite Airstrip
YDK3,S37* 38.9100',E142* 27.9900',898.0	// Dunkeld
YDER,S37* 56.1000',E143* 14.1600',570.0	// Derrinallum
YEDE,S37* 01.1300',E141* 15.0500',472.0	// Edenhope
YEL3,S37* 15.8200',E145* 51.2000',685.0	// Eildon
YELM,S36* 29.2100',E144* 38.4600',419.0	// Elmore
YEUA,S36* 47.3300',E145* 35.8400',597.0	// Euroa
YFH2,S36* 18.1800',E145* 49.3700',433.0	// Salcon Hawk
YFSK,S37* 41.4800',E144* 12.9100',1161	// Fiskville
YGDA,S29* 04.4000',E147* 22.5667',459.0	// Goodooga
YGLT,S37* 46.7500',E142* 32.3500',853.0	// Glenthompson
YGLO,S38* 13.6800',E144* 19.9100',50.9	// Geelong
YGT3,S37* 11.3100',E148* 16.1000',2565	// Gelantipy
YGMP,S37* 02.9900',E142* 16.4000',688.0	// Halls Gap - Grampians Airfield
YGBW,S35* 58.1900',E144* 23.2400',262.0	// Gunbower
YGD3,S37* 48.8000',E141* 39.5400',439.0	// Grassdale
YGTW,S37* 10.4400',E142* 50.0700',784.0	// Great Western
YHT3,S34* 46.1800',E142* 20.7200',160.0	// Hattah
YHL3,S37* 26.8100',E144* 44.2000',1108	// Riddells Creek - Hudson Lane
YILA,S36* 27.4000',E146* 25.8700',498.0	// Milawa Brown Bros Winery
YKNV,S36* 21.9400',E141* 14.9800',524.0	// Kaniva
YKT3,S36* 11.2600',E144* 32.0700',347.0	// Kotta
YKWR,S38* 11.6400',E145* 29.8800',16.9	// Koo-Wee-Rup
YKYB,S36* 20.4200',E144* 58.1800',377.0	// Kyabram
YKTN,S37* 13.7100',E144* 26.5400',1597	// Kyneton
YLF3,S37* 16.6200',E144* 41.2500',1607	// Lancefield
YLCS,S36* 48.8600',E145* 20.9200',577.0	// Locksley
YLED,S37* 54.5100',E144* 04.9000',728.0	// Lethbridge Airpark
YSLE,S38* 09.6500',E144* 41.3200',32.0	// St Leonards	
YLIL,S37* 41.4000',E145* 22.1000',238.0	// Lilydale
YLKE,S37* 50.4900',E147* 55.6700',239.0	// Lakes Entrance
YLV3,S37* 41.3500',E145* 24.6900',259.0	// Yarra Valley - Lakeview
YLW3,S38* 06.7200',E145* 45.9100',127.0	// Longwarry
YCN3,S38* 02.7400',E144* 19.4800',124.0	// Corio Aerodrome
YLSM,S37* 53.7800',E143* 18.3100',702.0	// Lismore
YLOD,S36* 48.4800',E145* 26.9200',656.0	// Longwood
YMCO,S37* 35.9333',E149* 43.2500',102.0	// Mallacoota
YMR3,S37* 59.0900',E141* 57.1400',275.0	// Macarthur
YMD3,S37* 53.0000',E144* 05.3000',849.0	// Meredith
YMEL,S37* 37.9800',E144* 34.4300',620.0	// Melton
YMV3,S37* 30.7900',E141* 52.2500',741.0	// Melville Forest
YMN3,E143* 17.1000',E143* 17.1000',1099	// Moonambel
YMNG,S36* 53.3000',E145* 11.1000',467.0	// Mangalore
YMPC,S37* 55.9000',E144* 45.2000',14.0	// Point Cook
YMG3,S37* 51.3400',E144* 23.8400',311.0	// Geelong - Moongara Airpark
YMAF,S37* 04.7000',E146* 07.6400',1135	// Mansfield
YITT,S36* 30.2700',E147* 21.4800',869.0	// Mitta Mitta
YML3,S38* 08.7000',E142* 46.9900',380.0	// Mortlake
YMIC,S38* 13.2400',E144* 09.0700',475.0	// Mount Moriac
YMEO,S36* 57.5700',E145* 42.0000',1164	// Merton
YND3,S37* 24.7500',E144* 57.4700',1089	// Natures Dozen Eggs Farm
YNVE,S36* 55.0500',E143* 05.6400',734.0	// Navarre
YNY3,S35* 08.5000',E143* 20.5700',262.0	// Nyah
YOCG,S38* 16.3700',E144* 33.8900',6.0	// Collendina - Ocean Grove
YOLA,S38* 17.2000',E143* 40.2100',449.0	// Colac
YORB,S37* 47.4167',E148* 36.5833',92.0	// Orbost
YOUY,S35* 04.7000',E142* 20.5500',173.0	// Ouyen
YPK3,S38* 06.1300',E145* 28.9300',45.0	// Pakenham
YSBE,S37* 30.2100',E144* 42.0000',1053	// Sunbury
YPF3,S38* 21.4700',E142* 15.8600',3.0	// Port Fairy
YPID,S38* 31.3833',E145* 19.6333',43.0	// Phillip Island (Newhaven)
YPH3,S37* 55.3400',E142* 15.9000',725.0	// Penshurst
YPOK,S36* 43.0000',E146* 53.3100',935.0	// Porepunkah
YPW3,S38* 40.2900',E146* 26.5200',59.0	// Port Welshpool
YPCH,S35* 21.9500',E142* 11.4600',259.0	// Patchewollock
YRYW,S36* 32.9200',E144* 14.3600',495.0	// Raywood (Bendigo Gliding Club)
YRID,S37* 28.6500',E144* 43.2000',994.0	// Riddell's Creek
YRSY,S37* 22.7200',E144* 44.3900',1499	// Romsey
YSB3,S36* 50.3200',E145* 43.5800',1620	// Strathbogie
YSM3,S37* 22.6500',E146* 45.5900',4652	// Snowy Mountains
YMIA,S34* 15.4200',E142* 03.1600',232.0	// Mildura - Sunraysia Gliding
YYBK,S37* 42.1500',E145* 25.1200',301.0	// Yarra Valley (Stringybark Strip)
YTDN,S38* 13.0900',E145* 25.4500',3.0	// Tooradin
YTP3,S37* 49.0200',E143* 45.1400',987.0	// Ted's Place
YTGG,S37* 20.1800',E145* 42.0400',705.0	// Taggerty
YTQY,S38* 17.6800',E144* 21.1100',3.0	// Torquay
YTYA,S38* 16.3100',E145* 10.5800',65.0	// Mornington Peninsula - Tyabb
YUB3,S35* 11.5500',E141* 43.0400',223.0	// Underbool
YVC3,S37* 11.3900',E142* 20.4400',728.0	// Halls Gap - Victoria Valley
YWAN,S37* 25.8200',E144* 59.8100',958.0	// Wallan
YWAN,S36* 23.3400',E146* 17.5000',515.0	// Wangaratta Private Airstrip
YWOV,S36* 40.2100',E144* 12.5000',498.0	// Bendigi - Woodvale
YWLP,S38* 56.8800',E146* 17.2300',211.9	// Wilson's Prom
YWBE,S37* 51.2900',E144* 36.7100',137.0	// Werribee
YWM3,S37* 43.4000',E142* 55.7000',718.0	// Westmere
YWTO,S34* 04.9300',E141* 52.9900',118.0	// Wentworth
YYP3,S37* 37.4800',E145* 08.0800',554.0	// Yarrambat Park
YYAG,S37* 37.7600',E145* 25.1400',337.0	// Yarra Glen
YYWG,S36* 01.7000',E146* 01.7000',424.0	// Yarrawonga

B. IF YOU ARE UPGRADING FROM THE OLD VERSION:

1. Delete all of the the AF2_xxxx.bgl files from the folder that the add-on 
scenery has been installed to.

2. Place the new AF2_xxxx.bgl files from this zip file into the same folder 
that the add-on sceneray has been installed to.

3. If you have installed AI traffic to operate in and out of these airports, 
you will need to change the old ICAO codes to the new ones. To make this 
easier for you, the enclosed file changes.txt contains a list of "before" 
and "after" codes.


C: TO UNINSTALL:

Delete the files and the default will then be active.


ANY PROBLEMS?
Please refer to my web site at www.adventure-unlimited.org for all support 
issues and contact.

THANKS
Thanks to Sebastian for his work on developing this scenery for our 
enjoyment, and to Mal for providing his excellent listing.

COPYRIGHT
These files are free to you. You must not make money out of them!

Happy flying!

John Hinson                            |
Harrow, UK                        ===X=O=X===          
September 2006                       '   '
www.adventure-unlimited.org
